Linkage Method Settings - TKH security BL2002PID User Manual

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
3. Adjust the time period
- Click on the selected time period, and enter the desired value. Click Save.
- Click on the selected time period. Drag the both ends to adjust the time period. - Click on the
selected time period, and drag it on the time bar.
4. Optional: Click Copy to... to copy the same settings to other days.
5. Click Save.

4.8.2 Linkage Method Settings

You can enable the linkage functions when an event or alarm occurs.
Trigger Alarm Output
If the device has been connected to an alarm output device, and the alarm output No. has been
configured, the device sends alarm information to the connected alarm output device when an alarm
is triggered.
NOTE: The function is only supported by certain models.
Steps
1. Go to Configuration → Event → Basic Event → Alarm Output .
2. Set alarm output parameters.
Automatic Alarm For the information about the configuration, see Automatic Alarm .
Manual Alarm For the information about the configuration, see Manual Alarm .
3. Click Save.
Manual Alarm
You can trigger an alarm output manually.
Steps
1. Set the manual alarm parameters.
Alarm Output No.
Select the alarm output No. according to the alarm interface connected to the external alarm
device.
Alarm Name
Edit a name for the alarm output.
Delay
Select Manual.
2. Click Manual Alarm to enable manual alarm output.
3. Optional: Click Clear Alarm to disable manual alarm output.
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 72
The Netherlands