TKH security BL2002PID User Manual page 35

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
EIS
Increase the stability of video image by using jitter compensation technology.
Mirror
When the live view image is the reverse of the actual scene, this function helps to display the image
normally.
Select the mirror mode as needed.
NOTE: The video recording will be shortly interrupted when the function is enabled.
Image Parameters Switch
The device automatically switches image parameters in set time periods.
Go to image parameters switch setting page: Configuration → Image → Image Parameters Switch ,
and set parameters as needed.
Set Switch
Switch the image parameters to the scene automatically in certain time periods.
Steps
1. Check Enable.
2. Select and configure the corresponding time period and the scene.
NOTE: For the scene configuration, refer to Scene Mode
3. Click Save.
Video Standard
Video standard is an ability of a video card or video display device that defines the amount of colors
that are shown and the resolution. The two most common video standard used are NTSC and PAL.
In NTSC, 30 frames are transmitted each second. Each frame is made up of 525 individual scan
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 35
The Netherlands