Smart Event - TKH security BL2002PID User Manual

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
The higher the value is, the more easily the exception will be detected, and the higher
possibility of misinformation would be.
Alarm Delay Times
The device uploads the alarm when the alarm reaches the set number of times.
4. Check Enable, and the selected diagnosis type will be detected.
5. Set arming schedule. See Set Arming Schedule .
6. Set linkage method. See Linkage Method Settings .
7. Click Save.
NOTE: The function is only supported by certain models. The actual display varies with
models.
Set Vibration Detection
It is used to detect whether the device is vibrating. The device reports an alarm and triggers linkage
actions if the function is enabled.
Steps
1. Go to Configuration → Event → Basic Event → Vibration Detection .
2. Check Enable.
3. Drag the slider to set the detection sensitivity. You can also enter number to set the sensitivity.
4. Set the arming schedule. See Set Arming Schedule .
5. Set the linkage method. See Linkage Method Settings .
6. Click Save.
NOTE: The function is only supported by certain models. The actual display varies with
models.

4.6.2 Smart Event

Set smart events by the following instructions.
NOTE: ● For certain device models, you need to enable the smart event function on VCA
Resource page first to show the function configuration page.
● The function varies according to different models.
Detect Audio Exception
Audio exception detection function detects the abnormal sound in the scene, such as the sudden
increase/decrease of the sound intensity, and some certain actions can be taken as response.
Steps
1. Go to Configuration → Event → Smart Event → Audio Exception Detection .
2. Select one or several audio exception detection types.
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 51
The Netherlands