Set Srtp; Port Mapping - TKH security BL2002PID User Manual

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
NOTE: The SNMP version you select should be the same as that of the SNMP
software.
And you also need to use the different version according to the security level required.
SNMP v1 is not secure and SNMP v2 requires password for access. And SNMP v3
provides encryption and if you use the third version, HTTPS protocol must be enabled.
3. Configure the SNMP settings.
4. Click Save.

4.7.3 Set SRTP

The Secure Real-time Transport Protocol (SRTP) is a Real-time Transport Protocol (RTP) internet
protocol, intended to provide encryption, message authentication and integrity, and replay attack
protection to the RTP data in both unicast and multicast applications.
Steps
1. Go to Configuration → Network → Advanced Settings → SRTP .
2. Select Server Certificate.
3. Select Encrypted Algorithm.
4. Click Save.
NOTE: ● Only certain device models support this function.
● If the function is abnormal, check if the selected certificate is abnormal in certificate
management.

4.7.4 Port Mapping

By setting port mapping, you can access devices through the specified port.
Before You Start
When the ports in the device are the same as those of other devices in the network, refer to Port to
modify the device ports.
Steps
1. Go to Configuration → Network → Basic Settings → NAT .
2. Select the port mapping mode.
Auto Port Mapping Refer to Set Auto Port Mapping for detailed information.
Manual Port Mapping Refer to Set Manual Port Mapping for detailed information.
3. Click Save.
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 63
The Netherlands