TKH security BL2002PID User Manual page 45

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
1. Go to Configuration → Storage → Schedule Settings → Capture → Capture Parameters .
2. Set the capture type. Timing
Capture a picture at the configured time interval.
Event-Triggered
Capture a picture when an event is triggered.
3. Set the Format, Resolution, Quality, Interval, and Capture Number.
4. Refer to Set Arming Schedule for configuring schedule time.
5. Click Save.
Capture Manually
Steps
1. Go to Configuration → Local .
2. Set the Image Format and saving path to for snapshots.
JPEG
The picture size of this format is comparatively small, which is better for network transmission.
BMP
The picture is compressed with good quality.
3. Click Save.
4. Click near the live view or play back window to capture a picture manually.
Set Timing Wake
When the device is sleeping, it will wake up at the set time interval, and capture pictures and upload
them.
Steps
NOTE: The function is only supported by certain device models.
1. Go to Configuration → System → System Settings → Power Consumption Mode , under Sleep
Schedule, click the time schedule to set Sleep Capture Interval.
2. Enter Configuration → Event → Basic Event → Timing Wake .
3. Check Enable.
4. Select Capture Types.
5. For the linkage method settings, see Linkage Method Settings .
6. Click Save.
Result
The device will wake up at the set sleep capture interval, and capture pictures and upload them.
View and Download Picture
You can search, view and download the pictures stored in the local storage or network storage.
Steps
1. Click Picture.
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 45
The Netherlands