Wiegand; Metadata; Time And Date - TKH security BL2002PID User Manual

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries

4.9.11 Wiegand

Check Enable and select the protocol. The default protocol is SHA-1 26bit.
If enabled, the recognized license plate number will be output via the selected Wiegand protocol.
NOTE: The function is only supported by certain camera models.

4.9.12 Metadata

Metadata is the raw data that the camera collects before algorithm processing. It provide the option
to users to explore various data usages.
NOTE: The function is only supported by certain camera models.
Go to Configuration → System → Metadata Settings to enable metadata uploading of the desired
function.
Smart Event
The metadata of the smart event includes the target ID, target coordinate, time, etc.

4.9.13 Time and Date

You can configure time and date of the device by configuring time zone, time synchronization and
Daylight Saving Time (DST).
Synchronize Time Manually
Steps
1. Go to Configuration → System → System Settings → Time Settings .
2. Select Time Zone.
3. Click Manual Time Sync..
4. Choose one time synchronization method.
- Select Set Time, and manually input or select date and time from the pop-up calendar.
- Check Sync. with computer time to synchronize the time of the device with that of the local
PC.
5. Click Save.
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 78
The Netherlands