Event And Alarm; Basic Event - TKH security BL2002PID User Manual

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
2. Set search condition and click Search.
The matched pictures showed in the file list.
3. Select the pictures then click Download to download them.
NOTE: Go to Configuration → Local , click Save snapshots when playback to change the
saving path of pictures.

4.6 Event and Alarm

This part introduces the configuration of events. The device takes certain response to triggered
alarm. Certain events may not be supported by certain device models.

4.6.1 Basic Event

Set Motion Detection
It helps to detect the moving objects in the detection region and trigger the linkage actions.
Steps
1. Go to Configuration → Event → Basic Event → Motion Detection .
2. Check Enable Motion Detection.
3. Optional: Highlight to display the moving object in the image in green.
1) Check Enable Dynamic Analysis for Motion.
2) Go to Configuration → Local .
3) Set Rules to Enable.
4. Select Configuration Mode, and set rule region and rule parameters. - For the information about
normal mode, see Normal Mode . - For the information about expert mode, see Expert Mode .
5. Set the arming schedule and linkage methods. For the information about arming schedule
settings, see Set Arming Schedule . For the information about linkage methods, see Linkage
Method Settings .
6. Click Save.
Expert Mode
You can configure different motion detection parameters for day and night according to the actual
needs.
Steps
1. Select Expert Mode in Configuration.
2. Set parameters of expert mode.
Scheduled Image Settings
OFF
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 46
The Netherlands