Video Recording And Picture Capture; Storage Settings - TKH security BL2002PID User Manual

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries

4.5 Video Recording and Picture Capture

This part introduces the operations of capturing video clips and snapshots, playback, and
downloading captured files.

4.5.1 Storage Settings

This part introduces the configuration of several common storage paths.
Set Memory Card
If you choose to store the files to memory card, make sure you insert and format the memory card in
advance.
Before You Start
Insert the memory card to the camera. For detailed installation, refer to Quick Start Guide of the
camera.
Steps
1. Go to storage management setting page: Configuration → Storage → Storage Management
→ HDD Management .
2. Select the memory card, and click Format to start initializing the memory card.
The Status of memory card turns to Normal from Uninitialized, which means the memory
card can be used normally.
3. Optional: Define the Quota of the memory card. Input the quota percentage for different
contents according to your need.
4. Click Save.
Detect Memory Card Status
The device detects the status of Hikvision memory card. You receive notifications when your
memory card is detected abnormal.
Before You Start
The configuration page only appears when a Hikvision memory card is installed to the device.
Steps
1. Go to Configuration → Storage → Storage Management → Memory Card Detection .
2. Click Status Detection to check the Remaining Lifespan and Health Status of your memory card.
Remaining Lifespan
It shows the percentage of the remaining lifespan. The lifespan of a memory card may be
influenced by factors such as its capacity and the bitrate. You need to change the memory card
if the remaining lifespan is not enough.
Health Status
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 38
The Netherlands