TKH security BL2002PID User Manual page 41

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
Mounting Type
Select file system protocol according to the operation system.
Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is
selected.
3. Test to check whether the network disk is available.
4. Click Save.
eMMC Protection
It is to automatically stop the use of eMMC as a storage media when its health status is poor.
NOTE: The eMMC protection is only supported by certain device models with an eMMC
hardware.
Go to Configuration → System → Maintenance → System Service for the settings.
eMMC, short for embedded multimedia card, is an embedded non-volatile memory system. It is able
to store the captured images or videos of the device.
The device monitors the eMMC health status and turns off the eMMC when its status is poor.
Otherwise, using a worn-out eMMC may lead to device boot failure.
Set Cloud Storage
It helps to upload the captured pictures and data to the cloud. The platform requests picture directly
from the cloud for picture and analysis. The function is only supported by certain models.
NOTE: If the cloud storage is enabled, the pictures are stored in the cloud video manager
firstly.
Steps
1. Go to Configuration → Storage → Storage Management → Cloud Storage .
2. Check Enable Cloud Storage.
3. Set basic parameters.
Protocol Version
Server IP
Serve Port
AccessKey
SecretKey
User Name and
Password
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
The protocol version of the cloud video manager.
The IP address of the cloud video manager. It supports IPv4
address.
The port of the cloud video manager. You are recommended to
use the default port.
The key to log in to the cloud video manager.
The key to encrypt the data stored in the cloud video manager.
The user name and password of the cloud video manager.
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 41
The Netherlands