TKH security BL2002PID User Manual page 43

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
The video is recorded when configured event is detected.
4. Set schedule for the selected record type. Refer to Set Arming Schedule for the setting
operation.
5. Advanced to set the advanced settings.
Overwrite
Enable Overwrite to overwrite the video records when the storage space is full. Otherwise
the camera cannot record new videos.
Pre-record
The time period you set to record before the scheduled time.
Post-record
The time period you set to stop recording after the scheduled time. Stream Type
Select the stream type for recording.
NOTE: When you select the stream type with higher bitrate, the actual time of the
pre-record and post-record may be less than the set value.
Recording Expiration
The recordings are deleted when they exceed the expired time. The expired time is
configurable. Note that once the recordings are deleted, they can not be recovered.
6. Click Save.
Record Manually
Steps
1. Go to Configuration → Local .
2. Set the Record File Size and saving path to for recorded files.
3. Click Save.
Set Lite Storage
After the lite storage is enabled, the frame rate and bitrate of the video stream can be reduced to
lengthen the storage time of the memory card when there is no moving object in the monitoring
scenario.
Steps
1. Go to Configuration → Storage → Storage Management → Lite Storage .
2. Check Enable and set the level. The higher the level is, the larger the frame rate and bitrate are,
and the shorter the recommended storage time is.
3. Set the storage time. The device automatically calculates the bitrate and offers the
recommended storage time according to the memory card space and level. You are recommended
to set the storage time to the device recommended time.
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 43
The Netherlands