Table of Contents
Advertisement
2. Rack Installation Specifications
Installable Racks
Table 22
Specifications for the Unit Installation Area
Specification
(1)
Rack front space
(Space between the fixed part of the ETERNUS DX on
the front side and the front of the rack)
(2)
Mount bracket length
(Size between each end of the front and rear rack
pillars)
(3)
Rack space
(Space between the fixed part of the ETERNUS DX on
the front side and the rear of the rack)
(4)
Rack mount kit installation area
■
Installation Requirements
When determining service areas, refer to the manual of the rack that is to be used.
Be sure to perform the installation according to the requirements described in
9)
and
"Installation Environment" (page
Condition
40mm or more
685mm or more
775mm or less
890mm or more
482mm or more
(recommended)
30).
70
Condition when a high-density drive
enclosure is installed
80mm or more
685mm or more
750mm or less
915mm or more
490mm or more
"Installation Specifications" (page
Site Planning Guide
Advertisement
Table of Contents
