Figure 6-1 Removing The Back Plate Screws; Figure 6-2 Removing The Back Plate - QMS ColorScript 310 User Manual

4. Use a Phillips screwdriver to remove the screws
connecting the printer's metal back plate.
The logic board is directly connected to the back plate of the
printer.

Figure 6-1 Removing the Back Plate Screws

5. Pull the back plate and logic board out of the printer.
Grip the back plate by the grey plastic handle and pull
straight back on the handle until the entire logic board is out
of the printer.
Grey Plastic Handle

Figure 6-2 Removing the Back Plate

Adding Memory to the Printer
Back Plate Screws
Pull Straight out on Handle
133