QMS ColorScript 310 User Manual page 103

• If the printer is connected directly to another Windows 95
computer on your network, connect first to the host
workstation and select the ColorScript 310/330 printer.
7. Click Next.
8. Select Yes or No to indicate whether you will print to the
ColorScript 310/330 printer from MS-DOS applications.
If you do not need to print to the ColorScript 310/330
printer from a specific MS-DOS application, select No.
9. Click Next.
10. Click Have Disk.
11. Enter the letter of the drive that contains the
95 ColorScript 310/330 Drivers
If your 3.5-inch diskette drive is drive A, enter
3.5-inch diskette drive is drive B, enter
12. Click OK.
The wizard displays the names of the available ColorScript
models.
13. Select the your ColorScript model name from the
Printers list box, then click Next.
14. Select the port that you want to assign to your printer.
Choose an available LaserWriter port (LW1, LW2, etc.).
15. Click Next.
16. Enter the printer name and click Next.
The wizard defaults to the ColorScript model name you
selected in Step 13. You can accept this name or enter
another name of your choice.
Setting Up the Printer
Windows
diskette.
A:
. If your
B:
.
85