Setting Up The Printer - QMS ColorScript 310 User Manual

Chapter 4 — Printing from the Mac OS
3. In the AppleTalk Zones field, select the network zone
that contains the ColorScript 310/330 printer.
The names of all the printers in a selected zone appear in the
Select a PostScript Printer field. If there are no zones on
your network, or if your computer is not on an AppleTalk
network, you will not see an AppleTalk Zones field, and the
names of all connected printers will appear in the Select a
PostScript Printer field when you select your LaserWriter
printer driver.
4. Select the ColorScript 310/330 printer.
If there is a color printer icon to the left of the ColorScript
310/330 printer name, your printer is already properly set
up and you can print to the selected ColorScript 310/330
printer. See "Printing from Various Applications" on
Page 45.
If a printer icon does not display next to the ColorScript
310/330 printer name, follow the set-up procedure in the
following section.
NOTE:
select the desired printer

Setting up the Printer

Before you can print to a printer, you must set up the printer.
Setting up the printer verifies that your computer can
communicate properly with the ColorScript 310/330 printer
using the PPD you installed in the procedure on Page 37. To set
up the printer:
40
If you need to print to another printer on your network,
from
the Chooser.