QMS ColorScript 310 User Manual page 148

Chapter 6 — Upgrading Your Printer
Installing additional memory requires that the technician
remove the ColorScript 310/330 printer's logic board and add
Single In-line Memory Modules (SIMMs) to the memory slots
on the logic board.
WARNING:
and speed, and all SIMMS must be 72-pin, 32-bit (no parity)
SIMMs, 70ns or faster.
In Table 6-1, QMS Europe B.V. recommends three standard
memory configurations. Although other memory configurations
are possible, these three memory configurations are the most
common and most cost effective memory solutions for most
printing requirements.
Table 6-1 Recommended Memory Configurations
Printer Model
ColorScript 310
Total Memory:
ColorScript 330
Total Memory:
130
Each pair of SIMMs must be of the same size
Factory Installed
Configuration
Bank 1 Bank 2
Empty
8 8
16 MB
Bank 1 Bank 2
Empty
16 16
32 MB
Maximum Practical
Configuration
Bank 1 Bank 2
32 32 8 8
80 MB
Bank 1 Bank 2
32 32 16 16
96 MB
Maximum Possible
Configuration
Bank 1 Bank 2
32 32 32 32
128 MB
Bank 1 Bank 2
32 32 32 32
128 MB