Figure 5-5 Printers Window - QMS ColorScript 310 User Manual

The Printers window displays, similar to the one shown in
Figure 5-5.

Figure 5-5 Printers Window

3. Double-click Add Printer.
This starts the Add Printer wizard, which is a series of
dialog boxes that step you through the process of setting up
your printer properly.
4. Click Next in the Add Printer wizard.
5. Select Local printer and click Next.
If you connected your ColorScript 310/330 printer to your
computer over an Ethernet network, go to "Setting up a
Network Printer Connection" on Page 82.
If you connected your ColorScript 310/330 printer to your
computer using a parallel port connection, continue with
this procedure.
6. Click Have Disk.
7. Enter the letter of the drive that contains the
95 ColorScript 310/330 Drivers
If your 3.5-inch diskette drive is drive A, enter
3.5-inch diskette drive is drive B, enter
Setting Up the Printer
Windows
diskette.
A:
. If your
B:
.
81