Understanding The Printer Controls And Indicators; Status Indicator Leds - QMS ColorScript 310 User Manual

Understanding the Printer Controls and Indicators

The front panel of the ColorScript 310/330 printer contains the
printer's status indicators and software controls. At startup, all
status indicator lights will turn on. When the printer is ready to
print, the red indicators will turn off and the green Ready icon
will stay lit. If any of the red status indicators remain
illuminated after startup, refer to "Status Indicator LEDs."

Status Indicator LEDs

Some aspects of the printer's status are communicated through
LED icons on the front panel of the printer:
The Ready icon glows green to indicate that the printer is
functioning normally.
The Paper jam icon glows red when there is a paper jam. If this
icon is on, remove the paper tray, open the printer cover, remove
the dye ribbon cassette, and remove the jammed paper.
The Replace Paper icon glows red when the printer is out of
paper or there is a problem with the paper cassette. If this icon is
on, make sure the paper cassette has paper or transparency film
in it, and that the cassette is fully seated in the front of the
printer. Refer to "Loading a Stack of Paper or Film" on Page 22
for instructions on loading the paper cassette.
The Cover Open icon glows red when the printer cover is open.
If this icon is on, make sure the cover is closed all the way. Refer
to "Removing the Ribbon Cassette" on Page 30 for instructions
on opening and closing the printer cover.
The Replace Ribbon icon glows red to indicate that the dye
ribbon is exhausted. If this icon is on, open the printer cover,
Understanding the Printer Controls and Indicators
149