The shipment contains an LCIF with three media cassettes
If any items are missing or damaged, contact your shipping
company or your local vendor.
WARNING! Do not modify the LCIF or change its components; otherwise, a fire or electric shock hazard may result.
ACHTUNG! Veränderm Sie nicht die große Papierzuführung (LCIF) oder tauschen Sie ihre Komponenten, da sonst Gefahr eines Stromschlags oder
Feurergefahr besteht.
WARNING! Always lock the stoppers. If the stoppers are not locked, the printer may move unexpectedly and cause personal injury.
ACHTUNG! Schrauben Sie immer die Arretierfüße heraus. Wenn die Arretierfüße nicht herausgeschraubt sind, könnte der Drucker wegrollen und
Personen verletzen.
WARNING! The printer weighs about 150 lbs (68 kg). Don't lift it by yourself. To avoid hand injury, be careful when placing the printer onto the large-
capacity input feeder.
ACHTUNG! Der Drucker wiegt ca 68 kg; bitte versuchen Sie niemals, das Gerät alleine anzuheben oder zu tragen. Lassen Sie die Papierkassette
wãhrend der Installation im Drucker, um Handverletzungen zu vermeiden.
»
Note: Leave the media cassette inside the printer when performing this. The printer and LCIF are flush on the front and sides (the back will protrude).
1
Caution: Do not tilt the printer more than 10° from
horizontal. Tilting could cause damage from
spilling of consumables. Make sure the LCIF
cables do not get caught under the printer.
3
148dv
»
Note: In compliance with UL guidelines, "The appliance inlet is considered to be the main disconnect device."
Plug the power cord into a grounded AC outlet and turn on the printer to print a startup page.
»
Note: The "Paper Source" section should indicate that the media tray setting contains the LCIF.
Front View
1 20 inches
2 28.7 inches
3 36.1 inches
4 22 inches
With two or more
people, lift the
LCIF using the top
carrying grips.
Place the LCIF on
a level surface.
Open the media
cassettes and
remove the
spacers:
ed "C" )
plastic spacer
Turn the printer off
and unplug the
power cord.
Locate the guide
pins.
Have four people
lift the printer
using the carrying
grips on the front,
left side, and back
of the printer.
Using the guide
pins to align the
printer and LCIF,
lower the printer
onto the LCIF.
Press the
recessed area on
the back cover of
the printer.
Pull forward to
remove the small
plastic cover.
Firmly plug the
connectors of the
LCIF cables flush
with the printer.
» Note: If the
®
(50.8 cm)
(72.8 cm)
(91.7 cm)
(55.9 cm)
WARNING! Do not open any panel or cover secured with screws
except when instructed in the user manual. The inside of the LCIF
contains high-voltage points, and there is a risk of electrical shock.
ACHTUNG! Öffnen Sie nie eine Abdeckung oder Verkleindung, die mit
Schrauben gesichert ist, außer Sie werden im Handbuch darauf
hingewiesen. Der Innernraum der großen Papierzuführung (LCIF)
verfügt über Startkstromkontakte, dort herrscht Stromschlag-Gerfar.
Cardboard
Foam (label-
Taped-on
2
4
connectors are
not firmly
connected, an
error will
result.
®
146dv.eps
56dv
Remove the
media cassettes.
Remove the tall
cardboard spacers
inside the LCIF.
Reinsert all the
cassettes.
Press down all
caster stoppers to
lock the LCIF
wheels.
Remove the LCIF
upper media
cassette.
Secure the two
screws.
Push the media
cassette back into
the LCIF.
Gather the cables
to the left.
Press the metal
cover on the LCIF
and hold it up until
the next step is
completed.
Start inserting the
small plastic cover
as high up as
possible so it
catches and
secures the metal
plate.
Push the plastic
cover until it clicks
into place flush
with the printer.