QMS ColorScript 310 User Manual page 100

Chapter 5 — Printing from Windows
8. Click OK.
The wizard displays the names of the available ColorScript
models.
9. Select the your ColorScript model name from the
Printers list box, then click Next.
10. Select the port that you want to assign to your printer.
Choose an available LPT port (LPT 1, LPT2, etc.).
11. Click Next.
12. Enter the printer name and click Next.
The Add Printer wizard defaults to the ColorScript model
name you selected in Step 9. You can accept this name or
enter another name of your choice.
13. Make sure the ColorScript 310/330 printer is connected
to your computer, switched on, and warmed up.
Do not connect the printer to your computer when either
machine is on. Refer to Chapter 1, "Installing Your Printer,"
for instructions on connecting the printer to your computer.
14. Select Yes to print a test page, then click Next.
Printing the test page verifies that the printer is properly
connected and installed. If the test page does not print
successfully, refer to Chapter 8, "Maintaining and
Troubleshooting Your Printer."
Setting up a Network Printer Connection
You can connect to the ColorScript 310/330 printer over an
Ethernet network either by connecting the printer directly to
your Ethernet network or by connecting the ColorScript 310/
330 printer to another Windows 95 workstation on your
Windows 95 network.
82