Installing An Optional Font; Removing An Optional Font; Formatting A Hard Disk; Collation - QMS 1725E Reference

Installing an Optional Font

Use the Administration/Disk Operations/Install Options menu to add
optional fonts to the hard disk from a font card. This selection copies
data from the card to the hard disk. See chapter 6, "Printer Options,"
for instructions.

Removing an Optional Font

Use the Administration/Disk Operations/Remove Option menu to
remove a previously installed optional font. See chapter 6, "Printer
Options," for instructions.

Formatting a Hard Disk

Use the Administration/Disk Operations/Format Disk menu to format
a hard disk. See chapter 6, "Printer Options," for instructions.

Collation

This option is used to specify which disk and how much of that disk
should be used to store collated print jobs when the jobs cannot be
accommodated by RAM space. The printer scrolls through all the
installed hard disk addresses. Refer to "Collating Output," in chapter
3, "Advanced Printing Features," in the Operations guide for more
information.

Spool Overflow

This option is used to specify which disk and how much of that disk
should be used to store print jobs when the jobs can not be accom-
modated by RAM. The maximum setting varies according to the disk
size installed in the printer.
Printer Configuration
Hard Disks
4-61