Table of Contents
Advertisement
RIP O
PERATION
Select one of the options below:-
DISABLED
SEND ONLY
LISTEN ONLY
SEND & LISTEN
Note: If RIP is disabled Static routes must be set up for each connection.
RIP T
YPE
RIP 1
RIP 1 COMPATIBLE
RIP 2
RIP is disabled.
The NAS (e.g. Marlin) broadcasts RIP tables,
but does not accept RIP broadcasts.
The NAS accepts RIP broadcasts but does no
transmit RIPs to the remote site.
The NAS both transmits and receives RIP
broadcasts.
Sets RIP 1 as the standard routing information
update protocol.
Sets routing for RIP1 compatibility on the
interface, with RIP 2 addressing on the
network. This allows non standard subnet
information to be passed onto those devices
that can process it.
Sets the standard routing as RIP 2, allowing
the increased security of specific subnet
transmission to remote sites.
R
EFERENCE
2-23
Advertisement
Table of Contents
