Table of Contents
Advertisement
Complete the NAS Name window as follows:-
NAME
IP ADDRESS
NAS TYPE
NUMBER OF PORTS
AUTHENTICATION
Note: This Secret needs to be configured directly onto the NAS. For
Nautica it can be found on the Config. RADIUS menu.
Note: We would recommend that the SECRET string used differs from the
NAS Names used and should not easily related. This information
should be stored in a secure place.
LSU CONNECTED
DEFAULT SERVICE
MAXIMUM LIFETIME
Input the Name of the NAS you require. This
will usually be the Name used to configure the
unit from the local manager.
Input the IP Address of the NAS unit.
Select the NAS Type from the NAS DEVICE
TYPE menu, and Type {Device Type Name}.
Enter the Number of ISDN channels available
on the NAS.
Enter the SECRET shared between the Server
and the NAS. This SECRET can take the form
of any string of alpha-numeric characters,
upper or lower case, with a maximum size of
31 characters.
To be completed [click] the box where a
Nautica 8000LSU is being used to Cluster
multiple Primary Rate devices.
This defines the default available Quality of
Service for that particular NAS. Two
parameters must be set:- Maximum Life-
Timer and Usage Limit.
This timer is in Seconds and represents how
long a Session can remain connected. The
total time includes periods of inactivity when
R
EFERENCE
2-7
Advertisement
Table of Contents
