Table of Contents
Advertisement
T
UTORIAL
57. Type SAVE<CR> at the Command Line prompt. The word SAVE will
disappear after a few seconds and the message "Please use the save
command" will also disappear.
58. If further ISDN devices are to be configured then repeat steps 53) to 57)
as appropriate. In this example we are using a PRI card so no further
ISDN Devices need to be configured.
No other changes to the Marlin's configuration is required. Note however that
the number of items in the "Configure IPX Route Menu", the "Configure
Paths Menu" and the "Configure IP Routes Menu" will change on the
establishment of a successful call to the CLAM on the remote office network
or to the roving PC User.
The following Menus shown below are produced when a successful call has
been established to the remote office and to the roving PC User.
Configure Paths Menu
3-46
Advertisement
Table of Contents
