Table of Contents
Advertisement
R
EFERENCE
Session ID (first 2 hex characters show the number of client start-ups).
Example Event Log for an Incoming Connection.
The remote user (Clam) is called WATFORD_CLAM the RADIUS
Client(NAS)/Server is at HQ.
Note: In the following paragraphs some lines have been wrapped in order to
fit the page. Lines preceded by "*" are comments.
[SEC]Access-Request NAS=HQ_MARLIN Account=WATFORD_CLAM
*User WATFORD_CLAM attempts access to HQ_MARLIN Site.
[SEC],07/31/96 10:58:22,Matched Nautica Key OK, WATFORD_CLAM
*Passwords are OK.
[SEC],07/31/96 10:58:22,Access-Accept NAS=HQ_MARLIN,
Account=WATFORD_CLAM, CLI=01923123456, t=28596
*Welcome (t = time in sec this access is valid).
[ACC],07/31/96 10:58:22,0,WATFORD_CLAM,10.0.0.1,2,
HQ_MARLIN,1,CC000008,3,0,CC0000080,1,0,
*This session has started.
[ACC],07/31/9610:58:22,0,WATFORD_CLAM,10.0.0.1,2,HQ_MARLIN,
1,CC000008,1,3,CC000008CC000009,1,1,1,0,,0,0,0,0,0,01923123456,
*First incoming connection has started.
[ACC],07/31/96 10:58:43,0,WATFORD_CLAM,10.0.0.1,2,
HQ_MARLIN,1,CC000008,2,3,CC000008CC000009,1,0,0,0,,37,37,1,1,20,
*The first connection closes 20 seconds later.
[SEC]Access-Request NAS=HQ_MARLIN Account=WATFORD_CLAM
2-43
Advertisement
Table of Contents
