Table of Contents
Advertisement
T
UTORIAL
This completes the configuration of the RADIUS Manager. The "RADIUS
Manager (RADIUS.LST)" Window may now be closed , by [clicking] the
Close Button, or it can be minimised and placed on the Task Bar, by [clicking]
the Minimise Button.
All that is left to be done is to run the RADIUS_S program. This will log all
activity between the Radius Server and the NAS Routers configured. If the
RADIUS Server Window is not already displayed on the screen [click] the
"RADIU_S" Button on the Task Bar. All connection/disconnection
information is shown in the lower of the two windows on the RADIUS Server
display. The top window is used to show the current QOS Status, Device
Status, Account Status and the Account Allocation of the RADIUS Server.
The information displayed in the "Status" window is selected by [clicking] the
Status Option on the RADIUS Server Menu Bar and [clicking] on the desired
option.
When the RADIUS Server Menu Bar is accessed all Authentication and
Accounting is paused. Authentication and Accounting will resume again once
the selected window is closed.
Refer to the RADIUS Server section of this manual for further information on
the options available on the RADIUS Server display.
3-35
Advertisement
Table of Contents
