Table of Contents
Advertisement
53. [Click] the OK Button to submit the Account Information. The "Remote
Accounts" window should now be displayed as shown below.
54. [Click] the SAVE Button to save all changes made to the Remote Account
profiles.
55. [Click] the ADD Button to add a new Account profile to the list, or select
an existing Account and [click] the EDIT Button to edit the configuration
of the Account Name selected.
56. To allocate a new Account Name enter a meaningful name in the "Name:"
box. In this instance enter the Name PPP_PC.
The NAS unit "Name" entered here must correspond exactly with Name
associated with the remote PC, i.e. the unit name or unit Id allocated to the PC
when configuring the PC's PPP stack.
57. Select the "Inactivity" Box. Enter a value of 600 (seconds). This sets the
session inactivity timeout to 10 mins.
58. [Click] the down-arrow on the right hand side of the Authentication Box.
The options revealed are UserPassword, CHAPPassword or
NoAuthentication. Select "CHAPPassword".
T
UTORIAL
3-27
Advertisement
Table of Contents
