Machine Pulling - probst TAS-UNI-450 Operating Instructions Manual

Operation

4.1.2 Machine pulling

Fit 2 pulling chains into eyebolt (2) to pull the device by
machine. Fasten the ends of the pulling chains on the wheel
loader/excavator (near hooh-in-system of shovel)
Step board (3) above the roller unit increase the pressure to
the ground (Operator can place a foot on it).
Ensure that no objects are lying on the floor in
the working area - risk of tripping when
walking backwards.
51000100 / 51000101
Fig. 6
(2)
17 / 19
(3)
GB