Remove A Lag - NETGEAR AV Series User Manual

The Link Aggregation Group page displays.
5. In the Link Aggregation Group table, to the right of the LAG that you want to change,
click the 3 dots icon and select Edit.
The Edit Link Aggregation Group window displays.
6. Change the settings as needed.
For more information about the settings, Create a LAG on page 37.
You cannot change the LAG ID.
7. Click the Apply button.
Your settings are saved. The window closes. The Link Aggregation Group page
displays again.
8. To save the settings to the running configuration, at the top of the page, click the
Save icon or text.

Remove a LAG

You can remove an existing LAG that you no longer need.
To remove a LAG:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4. Select Configure > Link Aggregation.
The Link Aggregation Group page displays.
5. In the Link Aggregation Group table, to the right of the LAG that you want to remove,
click the 3 dots icon and select Delete.
A confirmation window displays.
6. Click the Delete button.
The LAG is removed. The window closes. The Link Aggregation Group page displays
again.
Link Aggregation
AV Line of Fully Managed Switches M4250 Series
39 Audio Video User Manual