Table Of Contents - NETGEAR AV Series User Manual

(Continued)
Publication Part Publish Date
Number
202-12148-04 December 2021
AV Line of Fully Managed Switches M4250 Series
Comments
We added the following chapters:
Multicast on page 41
Port Configuration on page 56
We added the following sections in existing chapters:
Log in to the AV UI using the management interface default IP address
on page 10
Log in to the AV UI over the OOB port on page 11
About audio video bridging on page 16
About PTP residency time stamping on page 17
Configure PTP residency time stamping on page 29
Configure the IGMP querier for a network profile on page 30
Display the total PoE consumption for the switch on page 55
Management interface IP address on page 78, including Set a fixed IP
address for the management interface on page 78
and Enable the DHCP client for the management interface on page 79
OOB port IP address on page 80, including Set a fixed IP address for the
OOB port on page 80 and Enable the DHCP client for the OOB port on
page 81
Display or clear the port statistics on page 94
Access the CLI through the terminal in the AV UI on page 99
We changed the following sections:
Overview of preconfigured AV profile templates on page 15
Set the STP network redundancy for the switch on page 82
We made other minor changes throughout the manual.
3