Table of Contents
Advertisement
Table 2. STP network redundancy in the AV UI and the main UI
Configurable Setting
in the AV UI
Primary mode
Neutral mode
Backup mode
In the AV UI, you can set the STP network redundancy to Primary mode, Neutral mode,
or Backup mode. In the main UI, you must set a specific bridge priority value.
To set the STP network redundancy for the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4. In the Device Details section, below to the STP Network Redundancy field, click the
pencil icon.
The Edit STP Network Redundancy window displays.
5. Select the Primary mode, Neutral mode, or Backup radio button.
By default, the Neutral mode radio button is selected.
6. Click the Apply button.
Your settings are saved. The window closes. The Overview page displays again.
7. To save the settings to the running configuration, at the top of the page, click the
Save icon or text.
Manage and monitor the switch
AV Line of Fully Managed Switches M4250 Series
Associated Bridge Priority
Value in the AV UI
32768
61440
Configurable Bridge Priority
Setting in the Main UI
0
Any value from
4096~57344
61440
83
0
Audio Video User Manual
Advertisement
Table of Contents
