Table of Contents
Advertisement
(Continued)
Legend
Force Multicast
Warning
For more information about the ports, see Display detailed information about the
physical ports and LAGs on page 61.
The following table describes the information that displays in the Device Details
section, Configured Profiles section, CPU Utilization graph, Memory Utilization graph,
and Fans & Temperature section.
Field or Graph
Device Details
Product Name
Serial Number
Model
Date & Time
Country/Region
Base MAC Address
System Name
Firmware Version
AV UI Version
Boot Version
System Uptime
OOB IP Address
Manage and monitor the switch
AV Line of Fully Managed Switches M4250 Series
Description
This port is configured for forced multicast (see Configure the multicast mode for
one or more ports on page 42).
The port reached 98 percent of its ingress or egress transmit rate.
Description
M4250 by default. This field is fixed.
The serial number of the switch. This field is fixed.
The model number of the switch. This field is fixed.
The configured or detected date and time (see Date and time settings on page 75).
This field does not apply to the switch (N/A).
The MAC address of the switch. This field is fixed.
The configured system name, if any (see Add a system name on page 77).
The active main firmware version of the switch (see Update the firmware on page
72).
The active firmware version for the AV UI. This firmware is included in the main
firmware.
The active boot version of the switch. This firmware is included in the main firmware.
The period in days, hours, minutes, and seconds since the switch was last started.
The IP address for access to the main UI or AV UI over the out-of-band (OOB) port
of the switch (see OOB port IP address on page 80).
(This port is also referred to as the service port.)
88
Audio Video User Manual
Advertisement
Table of Contents
