Table of Contents
Advertisement
• Video NDI4: Use this template to connect the switch to video devices and cameras
that support Network Device Interface (NDI) version 4 with multi-TCP (mTCP)
transport.
• Video NDI5 with Dante, Q-Sys or AES67 audio: Use this template to connect the
switch to video devices and cameras that support NDI version 5 with Reliable User
Datagram Protocol (RUDP). Audio Dante, Q-SYS, or AES67 is supported at the same
time in the same VLAN.
• Video with AES67 audio: Use this template to connect the switch to IP video devices
and their controllers when AES67 audio is supported in the same VLAN.
This template can support devices such as Crestron DM NVX systems, AMX SVSI
products, ZeeVee products, Aurora Multimedia products, Kramer products, Atlona
products, products that support Libav, Visionary Solutions products, Wyrestorm
products, Extron NAV products, Dante video products, and products that comply
with standardization by the SDVoE Alliance.
• Video with Dante audio: Use this template to connect the switch to IP video devices
and their controllers when Dante audio is supported in the same VLAN.
This template can support devices such as Crestron DM NVX systems, AMX SVSI
products, ZeeVee products, Aurora Multimedia products, Kramer products, Atlona
products, products that support Libav, Visionary Solutions products, Wyrestorm
products, Extron NAV products, Dante video products, and products that comply
with standardization by the SDVoE Alliance.
• Video with Q-SYS audio: Use this template to connect the switch to IP video devices
and their controllers when Q-SYS audio is supported in the same VLAN.
This template can support devices such as Crestron DM NVX systems, AMX SVSI
products, ZeeVee products, Aurora Multimedia products, Kramer products, Atlona
products, products that support Libav, Visionary Solutions products, Wyrestorm
products, Extron NAV products, Dante video products, and products that comply
with standardization by the SDVoE Alliance.
About audio video bridging
802.1AS timing and synchronization is an audio video bridging (AVB) feature. AVB (also
referred to as 802.1AS) requires a license. For information about purchasing a license,
contact NETGEAR or your local NETGEAR reseller.
The IEEE 802.1AS standard specifies the protocol and procedures used to ensure that
the QoS requirements are guaranteed for time-sensitive applications, such as audio
and video.
The IEEE 1588 Precision Time Protocol (PTP) forms the basis of the IEEE 802.1AS
standard. PTP specifies a precise clock synchronization protocol that relies on
time-stamped packets.
Audio-Video Profile Templates
and Network Profiles
AV Line of Fully Managed Switches M4250 Series
16
Audio Video User Manual
Advertisement
Table of Contents
