Change A Network Profile; Remove A Network Profile - NETGEAR M4250 Series User Manual

Change a network profile

You can change an existing network profile.
To change a network profile:
1. Launch a web browser such as Google Chrome, Apple Safari, Mozilla Firefox, or
Microsoft Edge.
2. In the address field of your web browser, enter the IP address of the switch followed
by :8080.
The Login windows displays.
3. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4. Select Network Profiles.
The Network Profiles page displays.
5. In the Configured Profiles table, to the right of the network profile that you want to
change, click the 3 dots icon and select Edit.
The Edit Profile window displays.
6. Change the settings as needed.
For more information about the settings, Use an AV profile template to configure
and assign a network profile on page 12.
You cannot change the VLAN ID and AV profile template selection.
7. Click the Save button.
Your settings are saved. The window closes. The Network Profiles page displays
again.

Remove a network profile

You can remove an existing network profile that you no longer need.
To remove a network profile:
1. Launch a web browser such as Google Chrome, Apple Safari, Mozilla Firefox, or
Microsoft Edge.
2. In the address field of your web browser, enter the IP address of the switch followed
by :8080.
Manage Audio-Video Profile
Templates and Network Profiles
AV Line of Fully Managed Switches M4250 Series
14 Audio Video User Manual