Table of Contents
Advertisement
(Continued)
Field or Graph
Max Temperature
Fan Mode
Display the neighboring devices
You can display the devices that are connected to the switch.
To display the neighboring devices:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4. Select Configure > Neighbor.
The Neighbor page displays.
For each detected device, the page displays the following:
• Port. The port to which the device is attached.
• Host. The system name of the device, if any.
• MAC Address. The MAC address of the device.
• IP Address. The IP address of the device.
• Remote Port ID: The port number of the device.
Manage and monitor the switch
AV Line of Fully Managed Switches M4250 Series
Description
The maximum temperature for normal operation of the switch.
Note: If the switch exceeds this temperature, the operation of the switch might be
limited, for example, PoE might be disabled. The fans are placed in Cool mode. To
return the switch to normal operation, you must restart the switch. For more
information, see the hardware installation guide.
The mode can be Off, Quiet, or Cool. For more information, see Manually control
the fans on page 85.
90
Audio Video User Manual
Advertisement
Table of Contents
