Table of Contents
Advertisement
3. In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4. If the port legends do not display below the graphical display of the switch, select
the Show Legends check box.
The following table describes the ports legend.
Legend
Connected
Connected & Powered
Disabled
Error
Available
10G SFP+ Fiber Port
Blocked
Admin Down
1G SFP Fiber Port
PoE
PoE Disabled
LAG
Authorized
Unauthorized
VLAN Trunk
Auto Trunk
Manage and monitor the switch
AV Line of Fully Managed Switches M4250 Series
Description
The port is connected to a device that is powered up.
The port is connected to a powered device (PD) that is receiving PoE from the switch.
The port is disabled.
An error occurred on the port.
The port is not connected to a device but is available.
The port is a 10G SFP+ fiber port that can accept an SFP or SFP+ transceiver module.
The port is blocked. That is, STP blocked the port to prevent a loop.
The port is administratively down.
The port is a 1G SFP fiber port that can accept an SFP transceiver module.
The port is a PoE port. Depending on the switch model, the port can provide PoE+
or both PoE+ and PoE++.
PoE is disabled on the port (see Disable PoE for one or more interfaces on page
50).
The port is member of a LAG (see Link Aggregation on page 33).
The port authentication mode is Authorized (see Port authentication on page 63).
The port authentication mode is Unauthorized (see Port authentication on page
63).
The port functions as a VLAN trunk. That is, the port is a tagged port that processes
tagged VLAN traffic.
The port functions as an Auto-Trunk (see Auto-Trunk overview on page 27).
87
Audio Video User Manual
Advertisement
Table of Contents
