Custom Av Profile Templates; Create A Custom Av Profile Template - NETGEAR AV Series User Manual

A confirmation window displays.
6. Click the Delete button.
The network profile is removed. The window closes. The Network Profiles page
displays again.
7. To save the settings to the running configuration, at the top of the page, click the
Save icon or text.

Custom AV profile templates

You can create your own AV profile template. After you do so, you can use the custom
AV profile template to set up one or multiple network profiles (see Use an AV profile
template to configure and assign a network profile on page 19).
The advantage of a custom AV profile template is that you can decide whether to enable
multicast, PTP, and QoS. If you enable QoS, you can specify either a DSCP or CoS
configuration.

Create a custom AV profile template

Before you create a custom AV profile template, consider the following:
• Does the template require multicast to be enabled?
• Does the template require Precision Time Protocol (PTP) to be enabled?
• Does the template require QoS to be enabled, and if so, in a DSCP or CoS
configuration?
To add one or more QoS configurations, you need knowledge about configuring
QoS in a network.
Note: You can enable PTP and multicast for a custom AV profile template but you
cannot configure the PTP and multicast settings in the AV UI. For DSCP and CoS, you
can configure limited settings in the AV UI. To configure PTP and multicast settings and
all DSCP and CoS settings that are available on the switch, use the main UI or the CLI.
For more information, see the main user manual or the CLI command reference manual,
both of which you can download by visiting netgear.com/support/download.
To create a custom AV profile template:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
Audio-Video Profile Templates
and Network Profiles
AV Line of Fully Managed Switches M4250 Series
23 Audio Video User Manual