Table of Contents
Advertisement
(Continued)
Field or Graph
Management IP Address
STP Network Redundancy
Configured Profiles
For more information about network profiles, see Network profiles on page 18.
Profile Name
Profile Type
VLAN ID
IP Address
# of Assigned Ports
CPU Utilization
Memory Utilization
Fans & Temperature
Fans (numbered)
Sensor (numbered)
Manage and monitor the switch
AV Line of Fully Managed Switches M4250 Series
Description
The management IP address for access to the main UI or AV UI over any Ethernet
network port of the switch (see Management interface IP address on page 78).
The configured STP network redundancy mode of the switch (see Set the STP network
redundancy for the switch on page 82).
The name of the network profile.
The profile template on which the network profile is based.
The profile template can be any of the preconfigured profile template ( for example,
Data or Video, see Overview of preconfigured AV profile templates on page 15) or
a custom profile template (see Custom AV profile templates on page 23).
The VLAN ID that is assigned to the network profile.
The IP address that is assigned to the network profile.
The number of ports that are assigned to the network profile.
The CPU utilization as a percentage of the CPU capacity.
The memory utilization as a percentage of the total memory.
The number of internal fans depends on the switch model. The state of the fan must
be Active. If the state is not Active, there might be a problem with the fan and the
cooling.
The temperature in Celsius that is measured by the sensor. The number of internal
sensors depends on the switch model.
89
Audio Video User Manual
Advertisement
Table of Contents
