Enable The Dhcp Client For The Oob Port - NETGEAR AV Series User Manual

The Overview page displays.
4. In the Device Details section, below the OOB IP Address field, click the pencil icon.
The Edit OOB IP Address window displays.
5. From the OOB IP Settings menu, select DHCP Static and specify the following
settings:
• OOB IP Address: The static IP address for the OOB port. By default, no IP address
is set for the OOB port.
• Subnet Mask: The IP subnet mask for the OOB port. By default, no subnet mask
is set for the OOB port.
• Default Gateway: The gateway through which the OOB port can be reached.
By default, no IP address is set for the default gateway.
WARNING: If you are logged in to switch over the OOB port, when you click the
Apply button, you are disconnected and need to log in to the switch at the new IP
address.
6. Click the Apply button.
Your settings are saved. The window closes. The Overview page displays again.
7. To save the settings to the running configuration, at the top of the page, click the
Save icon or text.

Enable the DHCP client for the OOB port

By default, the DHCP client for the OOB port is enabled. If you connect the OOB port
to your network but the port does not receive an IP address from a DCHP server, the IP
address for the port is set to 192.168.0.239 with 255.255.255.0 as the subnet mask. The
same occurs if you connect the OOB port directly to a computer and reboot the switch.
If you set a fixed IP address for the OOB port, the DHCP client is disabled. You can
enable the DHCP client again.
To enable the DHCP client for the OOB port:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
Manage and monitor the switch
AV Line of Fully Managed Switches M4250 Series
81 Audio Video User Manual