Remove A Radius Server - NETGEAR AV Series User Manual

3. In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4. Select Configure > Security.
The Security page displays.
5. In the RADIUS Server Settings section, do one of the following:
• Add a new RADIUS server: To add the settings for a new RADIUS server, click
the + Add Server link.
• Change a RADIUS server: To change the settings for a RADIUS server that you
previously added, click the server link, for example, Server1 or Server2.
6. Configure the settings for the RADIUS server in the following fields:
• RADIUS Address: The IP address of the RADIUS server. The switch must be able
to reach this IP address.
You cannot change the IP address for a RADIUS server that you previously added.
• Port Number: The UDP port number used to reach the RADIUS server. The
default is port 1812. You can specify a custom port in the range from 1 to 65535.
• Secret Key: The secret key is the password for authentication and encryption of
all RADIUS communications between the switch and the RADIUS server. This
password must match the one that is configured on the RADIUS server.
You cannot change the secret key for a RADIUS server that you previously added.
7. Click the Apply button.
Your settings are saved.
8. To save the settings to the running configuration, at the top of the page, click the
Save icon or text.

Remove a RADIUS server

You can remove a RADIUS server that you no longer need.
To remove the settings for a RADIUS server:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Security
AV Line of Fully Managed Switches M4250 Series
67 Audio Video User Manual