CS 2100/Meridian SL-100 configuration
Single-card configuration
After installing the ICB card(s) and connecting the terminal for CLI access
and the server for BUI access, perform CS 2100/Meridian SL-100 database
configuration.
(page 55)
Figure 11
Single-card conference, 10 conferences, 32 ports
Configuration procedure
Single-card installation enables up to 10 conferences on one 32-port ICB
card. Each ICB card can use one ICB ACD Group to handle all the access
DNs required.
To configure an ICB single-card conference with direct meeting access, from
a maintenance and administration position (MAP) terminal follow the steps
in
Procedure 2 "Configure a single-card conference" (page
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100
Nortel Integrated Conference Bridge: Service Implementation Fundamentals
Copyright © 2007, Nortel Networks
.
Figure 11 "Single-card conference, 10 conferences, 32 ports"
shows the tables to datafill for single-card setup.
Note: If single-number access is being used, the DN pairs are not
required. Instead configure a single-number access DN.
NN43001-558/555-4001-135 01.02 Standard
ICB Release 4 20 June 2007
CS 2100/Meridian SL-100 configuration 55
56).