Procedure 50 Stand-Alone Card To Primary Card; Nortel Integrated Conference Bridge: Service Implementation Fundamentals; Nn43001-558/555-4001-135 01.02 Standard - Nortel 2100 Fundamentals

232 Upgrades
3
4
5
Procedure 50
Stand-alone card to primary card
Step
1
2
3
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100

Nortel Integrated Conference Bridge: Service Implementation Fundamentals

Copyright © 2007, Nortel Networks
.
If 10 DN pairs are configured, the system deletes one automatically.
The ICB first attempts to delete a DN pair that has no conferences
scheduled against it. If no such DN pair is found, the ICB deletes the
DN pair with the least number of conferences using it. All associated
conferences are deleted.
Note: A DN pair used by a permanent conference is not deleted.
If a DN pair is deleted in direct-access dialing mode, a pop-up
message appears. Note the deleted DN pair, as it can be removed
from the Meridian switch configuration.
The system displays Step 2 of the Installation Wizard (see
Access Numbers" (page
above, took place, this is reflected in the DN table. If the direct
access dialing mode is used, only nine DNs appear.
Click the Submit & Continue button. The system saves the change
and the screen returns to the ICB Dashboard.
Logout of this card and proceed to the primary ICB configuration.
Action
Access the ICB Installation Wizard: Step 1 - Basic Card Settings
window (see "Step 1 - Basic Card Settings" (page
field, select the radio button "Dual Card - Primary."
Click the Submit & Continue button.
If 10 DN pairs are configured, the system deletes one automatically.
The ICB first attempts to delete a DN pair that has no conferences
scheduled against it. If no such DN pair is found, the ICB deletes the
DN pair with the least number of conferences using it. All associated
conferences are deleted.
Note: A DN pair used by a permanent conference is not deleted.
If a DN pair is deleted in direct-access dialing mode, a pop-up
message appears. Note the deleted DN pair, as it can be removed
from the Meridian switch configuration.
The system displays Step 2 of the Installation Wizard (see
Access Numbers" (page

NN43001-558/555-4001-135 01.02 Standard

ICB Release 4 20 June 2007
78)). If the automatic change, as described
—End—
78)). If the automatic change, as described
"Step 2 -
75)). In the "Type"
"Step 2 -