Procedure 39 Configure Error Message Filtering; Nortel Integrated Conference Bridge: Service Implementation Fundamentals; Nn43001-558/555-4001-135 01.02 Standard - Nortel 2100 Fundamentals

All filtering criteria can be defined separately for appearance on the CLI and
for storage in error log files (that is, a selected group of messages can be
defined to appear in the CLI, but not in the error log, or visa versa).
Follow the steps in
193)
Procedure 39
Configure error message filtering
Step
1
2
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100

Nortel Integrated Conference Bridge: Service Implementation Fundamentals

Copyright © 2007, Nortel Networks
.
Procedure 39 "Configure error message filtering" (page
to configure message filtering.
Action
Access the CLI SM directory and enter the following:
ERR
The CLI displays command inputs in the following three sections:
• FORMAT
• CLI_SEVERITY_FILTER
•
DISK_SEVERITY_FILTER
You can edit the values as per normal CLI usage.
Note: If you use the second level login command, two more
filter sections are available: CLI_FW_COMPONET_FILTER and
DISK_FW_COMPONENT_FILTER.
EXAMPLE:
ps
// technician enters err
// ICB displays section name and its parameters, and prompts for
action:
section [FORMAT]
CLI error message format:
Disk error message format:
both
Modify, Next section, Cancel:
n
// next: go to next section
section [CLI_SEVERITY_FILTER] // filter CLI messages by
severity
yes // yes means that the message will appear
Critical:
MAJOR: yes
MINOR: yes
WARNING: yes
INFO: yes

NN43001-558/555-4001-135 01.02 Standard

ICB Release 4 20 June 2007
Error message handling 193
long
short // default is long for