Procedure 9 Access The Icb Remotely Using A Modem - Option 11C Or Cs 1000; Procedure 10 Access The Icb Remotely Using A Lan Hub - Option 11C Or Cs 1000; Nortel Integrated Conference Bridge: Service Implementation Fundamentals; Nn43001-558/555-4001-135 01.02 Standard - Nortel 2100 Fundamentals

Procedure 9
Access the ICB remotely using a modem - Option 11C or CS 1000
Step
1
2
3
4
5
6
Procedure 10
Access the ICB remotely using a LAN hub - Option 11C or CS 1000
Step
1
2
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100

Nortel Integrated Conference Bridge: Service Implementation Fundamentals

Copyright © 2007, Nortel Networks
.
Action
Verify that the Ethernet Adapter/Medium Access Unit (MAU) is
installed in the Option 11C or CS 1000. Insert the industry-standard
MAU into the Ethernet Connection on the back of the Call Server
and Media Gateway.
Note: The Ethernet MAU comes with the cable kits for the Call
Server and Media Gateway.
Plug the terminal cable DB-9 female connector into the DB-9 male
connector on the Ethernet Adapter/MAU on the I/O panel.
Plug the DB-25 male connector at the other end of the terminal
cable into the DB-25 female connector of the customer-supplied
DB-25F/DB-25M nullmodem adapter.
Plug the DB-25 male connector of the DB-25F/DB-25M nullmodem
adapter into the DB-25 female connector on the modem.
Insert the modular RJ11 plug into the RJ11 jack on the modem.
Insert the other end of the RJ11 plug into the RJ11 jack on the wall.
Action
Verify that the Ethernet Adapter/MAU is installed in the Option 11C
or CS 1000. Insert the industry-standard MAU into the Ethernet
Connection on the back of the Call Server and Media Gateway.
Note: The MAU comes with the cable kits for the Call Server
and Media Gateway.
Insert the modular cable RJ-45 plug into the RJ-45 jack on the
Ethernet Adapter/MAU.

NN43001-558/555-4001-135 01.02 Standard

ICB Release 4 20 June 2007
ICB installation and configuration procedures 71
—End—
—End—