4
5
6
Procedure 51
Meridian switch configuration changes
Step
1
2
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100
Nortel Integrated Conference Bridge: Service Implementation Fundamentals
Copyright © 2007, Nortel Networks
.
above, took place, this is reflected in the DN table. If the direct
access dialing mode is used, only nine DNs appear.
Click the Submit & Continue button.
The system displays Step 4 of the Installation Wizard (see
Dual Card Meetings" (page
If a DN pair was automatically deleted as described above, it
appears in the fields "Conference access number" and "Chairperson
number in primary card." You can change these numbers; they must
be configured in the Meridian switch as well.
Fill in all the fields as described in the installation instructions, and
click the Finish button.
Logout of this card and proceed with the Meridian switch
configuration change (see
configuration changes" (page
Action
If a DN pair was deleted from the secondary or primary card, delete
it from the switch datafill.
Configure the DNs defined in the Installation Wizard Step 4 window
of the primary ICB. Define them as described in the dual-card
ICB installation instructions (for the Meridian 1 or CS 1000 see
"Configure DNs for a dual-card conference" (page
2100 or Meridian SL-100 see
NN43001-558/555-4001-135 01.02 Standard
ICB Release 4 20 June 2007
Upgrade procedures 233
80)).
Procedure 51 "Meridian switch
233)).
—End—
"Dual-card configuration" (page
—End—
"Step 4 -
52); for the CS
60)).