230 Upgrades
3
4
Upgrade to the single DN access method
Follow the steps in
to upgrade an existing MICB Release 2 or MICB Release 3 card to ICB
Release 4 configured with single DN access.
Procedure 48
Upgrade to single DN access
Step
1
2
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100
Nortel Integrated Conference Bridge: Service Implementation Fundamentals
Copyright © 2007, Nortel Networks
.
a. IP address - the remote FTP server where the upgrade files
are stored.
b. Path to file - path of the folder on the computer where the
upgrade files are stored (for example, c:\ICB\4_01).
c. Login - login name for FTP.
d. Password - password for FTP login.
Click on the Get Files button to start the FTP transfer session.
After the previous steps finishes, click on the Upgrade & Restart
button.
The ICB copies the files from the FTP server and performs a restart.
When the restart is complete, the current BUI session is lost. Login
again as an administrator. When returning to this window, the new
firmware version should appear in the top-right corner of the window.
Procedure 48 "Upgrade to single DN access" (page 230)
Action
Follow
Procedure 43 "MICB Release 2 or MICB Release 3 card
upgrade" (page 225)
Release 3 card to an ICB Release 4 card.
Configure the DNs.
a. Remove the DN pairs from the switch datafill. For more
information, if your system is a Meridian 1 or CS 1000, see
"Assign ACD DNs" (page
Meridian SL-100 see
Note: DN pairs can be left in the ICB. Callers to existing
conferences configured with direct access DNs will be
requested to enter the access DN to reach the meeting.
b. Configure the single access DN in the switch. For more
information, if your system is a Meridian 1 or CS 1000, see
NN43001-558/555-4001-135 01.02 Standard
ICB Release 4 20 June 2007
—End—
to upgrade an MICB Release 2 or MICB
48); if your system is a CS 2100 or
"Single-card configuration" (page
55).