Raid Upgrade Kit - Nortel BCM200 Installation And Maintenance Manual

68 Chapter 2 Introducing the BCM hardware
Figure 42 BCM200 main unit hard disk and bracket
Front view
Hard disk
Connector
Figure 43 BCM400 main unit hard disk and bracket
Front view
Hard disk

RAID upgrade kit

The BCM200 main unit and the BCM400 main unit (standard) can contain a redundant array of
independent disks (RAID). The RAID upgrade kits have a single hard disk (mirror) and RAID
controller card. Use your current hard disk (from the single disk system) as the primary hard disk.
When the RAID upgrade is installed, the data from the primary hard disk is written to the mirror
hard disk. The dual hard disk configuration provides one-fault tolerance capability.
N0060612 N0060612
Hard disk bracket
Hard disk bracket
Hard disk bracket lift tab
Rear view
Hard disk bracket lift tab
Rear view