Evaluation Board Hardware; Ad7366/Ad7367 Device Description - Analog Devices AD7366 User Manual

Evaluation Board User Guide

EVALUATION BOARD HARDWARE

AD7366/AD7367 DEVICE DESCRIPTION
The AD7366/AD7367 are dual 12-bit/14-bit, high speed, low
power, successive approximation analog-to-digital converters
(ADCs) that feature throughput rates up to 1 MSPS. The device
contains two ADCs, each preceded by a 2-channel multiplexer,
and a low noise, wide bandwidth track-and-hold amplifier.
The AD7366/AD7367 are fabricated on the Analog Devices,
Inc., industrial CMOS process (iCMOS2), which is a tech-
nology platform combining the advantages of low and high
voltage CMOS. The iCMOS® process allows the
AD7367 to accept high voltage bipolar signals in addition
to reducing power consumption and package size.
The
signals in the ±10 V range, ±5 V range, and 0 V to 10 V range.
The
be disabled to allow the use of an external reference. If a 3 V
reference is applied to the D
AD7367
mum ±12 V V
input range.
Complete specifications for the
AD7366/
the
which should be consulted in conjunction with this user guide
when using the
Rev. A | Page 5 of 20
AD7366/AD7367 can accept true bipolar analog input
AD7366/AD7367 have an on-chip 2.5 V reference that can
A and D
CAP
can accept a true bipolar ±12 V analog input. Mini-
and V supplies are required for the ±12 V
DD SS
AD7366/AD7367
AD7366/AD7367 data sheet, available from Analog Devices,
AD7366/AD7367
UG-408
B pins, the AD7366/
CAP
are provided in
evaluation board.