Basic Hardware Setup - Analog Devices AD7366 User Manual

Evaluation Board User Guide

BASIC HARDWARE SETUP

The AD7366/AD7367 evaluation board connects to the
(EVAL-SDP-CB1Z) system demonstration board. The
EVAL-SDP-CB1Z board is the controller board, which is the
communication link between the PC and the main evaluation
board.
Figure 2 shows a photograph of the connections made between
the AD7366/AD7367 daughter board and the
board.
Before connecting power, connect the EVAL-AD7366SDZ/
EVAL-AD7367SDZ board to connector A or connector B on
the EVAL-SDP-CB1Z board. Nylon screws are included in
the evaluation kit and can be used to ensure that the EVAL-
AD7366SDZ/EVAL-AD7367SDZ board and the EVAL-SDP-
CB1Z board are connected firmly together.
Once the EVAL-AD7366SDZ/EVAL-AD7367SDZ board and
the EVAL-SDP-CB1Z board are connected securely, connect
the power supplies on the evaluation board. The EVAL-
AD7366SDZ/EVAL-AD7367SDZ requires an external power
supply, which is included in the evaluation board kit. Connect
this power supply to the connector J702 on the EVAL-
AD7366SDZ/EVAL-AD7367SDZ board. Alternatively, a bench
power supply may be used to power the EVAL-AD7366SDZ/
EVAL-AD7367SDZ via J700. Further details on the required
power supplies connections and options are detailed in Table 4.
EVAL-SDP-CB1Z
Before connecting the
ensure that the
from the enclosed CD. The full software installation proce-
dure is detailed in the Evaluation Board Software section.
Finally, connect the
the USB cable enclosed in the
Windows® XP platform, you may need to search for the
EVAL-SDP-CB1Z
the drivers for the
operating system.
Rev. A | Page 9 of 20
board to your PC,
EVAL-SDP-CB1Z
AD7366/AD7367 software has been installed
EVAL-SDP-CB1Z board to the PC via
EVAL-SDP-CB1Z
drivers. Choose to automatically search for
EVAL-SDP-CB1Z board if prompted by the
UG-408
kit. If using