Nortel 6120 Fundamentals page 53

The top portion of the screen is the toolbar, and the bottom portion is the
configuration area. Only part of the configuration area is shown in
"Configuration Cradle software toolbar" (page
On the left side of the screen is the category file control area. Each category
(System, Group and User) has a file name window, file buttons (Open and
Save) and a save flag. Each save flag displays different colors, depending
on the status of the file:
•
•
•
•
To the right of the category file control area is the copy control area, made
up of the category copy control boxes and the arrow buttons. The left arrow
is used to copy the information in the Phone settings column to the Editable
settings column. The right arrow is used to copy the information from the
Editable settings column to the Phone settings column. The check boxes
above these arrows control which categories are copied.
Next to the copy control area is the cradle control area, made up of the
control buttons, flags and information area. The cradle control buttons
(Read Phone, Write Phone and Stop) control the communication between
the software and the cradle. If no handset is in the cradle when the buttons
are pressed, an error message appears. When the handset is read,
its information (Serial number, MAC address and software version) are
displayed in the boxes. The status flags display the action in progress with
the cradle (Active, Read, Write, Error).
Below the toolbar is the configuration area. Each configurable option
appears, with a set of category radio buttons. The category radio buttons
are used to indicate which category the option is assigned to. An option can
exist in only one category. The option box in the Editable settings column
is where changes can be made. The option box in the Phone settings
column is read-only.
Copyright © 2007, Nortel Networks
.
Configuration Cradle for the WLAN Handset 2210/2211/2212 53
Red—file does not exist. The file name in the window is not yet created.
Yellow—file not loaded. The file name in the window exists in the
ConfigData folder but is not loaded into the Editable settings.
Green—unsaved edits. After you make changes in the Editable settings
fields, the green indicator indicates the changes are not saved.
Gray—file up-to-date. The settings are saved.
Note: When entering security keys, the cradle displays the key as
entered. This is different from the way the handset handles the display
through the Admin menu (key is not displayed).
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
Figure 3
52).