Nortel 6120 Fundamentals page 36

36 Handset firmware
4
5
6
7
8
9
Copyright © 2007, Nortel Networks
.
•
pd14udus.bin
If you are assigning static IP addresses, ensure that the wireless
handset IP address, TFTP Server IP address, Subnet Mask, and
Default Gateway information are accurate in the wireless handset
Admin menu.
OR
If you are using a DHCP server, ensure that the DHCP options are
configured. For more information, see
Ensure the wireless handset has properly configured SSID and Reg
Domain Information within the Admin menu.
If broadcast SSIDs are accepted at the APs, the handset
automatically learns the SSID information when powering on.
Using the Admin menu on the wireless handset, ensure the
Telephony Protocol menu option is configured to 032.
This ensures the handset checks for the proper UNIStim firmware
files each time it powers on.
Power on the wireless handset.
The firmware now downloads to the wireless handset. The status
bar increments fully across the wireless handset display for each
function that is performed in the download process, and the file
name appears.
Upon completion of the update process, the wireless handset
reboots with the new firmware.
Register the wireless handset with the CS 1000 system as if it were
an IP Phone 2004.
Properly label the wireless handset with the appropriate extension
number.
For future firmware upgrades, update the firmware files that are
stored on the TFTP Server. Each time the wireless handset is
powered on, it checks with the TFTP Server to ensure that it has
the proper firmware version, and downloads the new firmware if
necessary.
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
"DHCP options" (page
—End—
28).